This guide covers TESDA Driving NC II and Driving NC III and how to train for free.
If you want to become a professional driver, TESDA has driving qualifications at two levels. Driving NC II is for light vehicles, while Driving NC III is for bigger vehicles such as passenger buses, straight trucks and articulated vehicles. This page explains what each level covers, the training hours, who can enroll, how scholarships work and how to get certified. We are an independent guide site, not TESDA and not LTO. Enrollment happens only at TESDA offices, TESDA-accredited training institutions, or through official TESDA channels.
Driving NC II vs. Driving NC III at a glance
Driving NC IILight vehicles under LTO restriction codes 1 and 2. Nominal duration: 118 hours.
Driving (Passenger Bus/Straight Truck) NC IIIBuses and straight trucks under LTO restriction codes 3 up to 5. Nominal duration: 122 hours.
Driving (Articulated Vehicle) NC IIIA separate NC III. Nominal duration in TESDA’s TR list: 108 hours.
National CertificateAwarded after passing the competency assessment
The restriction codes above are the terms used in the TESDA Training Regulations. Driver’s licences are issued by the Land Transportation Office (LTO), not by TESDA. A TESDA National Certificate is not a driver’s licence, so check with LTO which licence you hold and which one you need for the vehicle you want to drive.
Driving NC II: what you will learn
According to the TESDA Training Regulations for Driving NC II (promulgated December 2004), this qualification covers the skills to operate light motor vehicles classified under LTO restriction codes 1 and 2, transport passengers and loads over set routes to local or district locations, collect fares authorized by the proper government agency, follow local traffic rules, and do minor vehicle repairs and servicing.
The core units are:
- Carry out minor vehicle maintenance and servicing
- Drive light vehicle
- Obey and observe traffic rules and regulations
- Implement and coordinate accident-emergency procedures
The common units include applying sealant and adhesive, moving and positioning the vehicle, measurement and calculation, reading specifications and manuals, using lubricants and coolants, and shop maintenance. The training hours are 18 hours basic, 20 hours common and 80 hours core, for 118 hours in total. The TR says graduates are competent to work as a professional driver or light vehicle driver.
Driving NC III (Passenger Bus/Straight Truck): what you will learn
The Training Regulations for this qualification were promulgated on January 14, 2011. They cover driving buses and straight trucks classified under LTO restriction codes 3 up to 5 on highways, transporting passengers or heavy goods, liquids and materials over long or short distances, following traffic rules and ordinances, and doing minor repairs on the assigned vehicle.
The core units are:
- Perform minor maintenance and servicing on vehicles under restriction codes 3 up to 5
- Perform pre- and post-operation procedures for these vehicles
- Obey and observe traffic rules and regulations
- Observe road health and safety practices
- Implement and coordinate accident-emergency procedures
- Drive passenger bus
- Drive straight truck
Because it is an NC III, the basic units include leading workplace communication, leading small teams, negotiation and problem solving. The training hours are 20 hours basic, 20 hours common and 82 hours core, for 122 hours in total. Graduates are competent to work as a passenger bus driver or straight truck driver.
TESDA also has a separate Driving (Articulated Vehicle) NC III qualification. Ask your school which NC III they offer, since the two are different programs.
Who can enroll?
The Driving NC II Training Regulations list these trainee entry requirements:
For Driving (Passenger Bus/Straight Truck) NC III, the same three requirements apply, plus one more:
Schools and scholarship programs may add their own rules. TESDA’s Citizen’s Charter says the face-to-face scholarship inquiry service at Provincial and District Offices is for Filipinos 15 years old and above. Ask the school for its full list of requirements, including any licence the school needs to see.
Free training through scholarships, and the allowance
TESDA offers free training through programs such as the Training for Work Scholarship Program (TWSP), the Special Training for Employment Program (STEP), Private Education Student Financial Assistance (PESFA), and programs under the Universal Access to Quality Tertiary Education Act (UAQTEA). Driving NC II and Driving (Articulated Vehicle) NC III have appeared in TESDA’s published lists of qualifications with available scholarship slots. Slots are limited and differ by school and province.
About the allowance: according to TESDA’s Citizen’s Charter, the Training Support Fund is the allowance given to TWSP, TTSP, STEP, PESFA and UAQTEA scholars, based on the number of training days they attended. The amount and eligibility are confirmed by the TESDA office or your training center. Avoid anyone who asks for payment to “reserve” a scholarship slot.
How to apply
Documents you may need
TESDA’s Citizen’s Charter lists these documents for scholarship applicants at TESDA training institutions. Each school may differ:
Assessment and National Certificate
For Driving NC II, the TR says you must show competence in all the units to receive a National Certificate signed by the TESDA Director General. The qualification may be attained through a single comprehensive project-type assessment that covers all the required units. The assessment focuses on the core units. Both graduates of training programs and experienced workers, employed or self-employed, may apply for assessment.
Is there a free online driving course?
We did not find a Driving NC II or NC III course in the TESDA Online Program catalog at e-tesda.gov.ph. Driving is a hands-on skill, so expect to train in person at an accredited school. Check e-tesda.gov.ph directly for any new courses.
Career paths
Based on the Training Regulations, Driving NC II prepares you for work as a professional driver or light vehicle driver. Driving (Passenger Bus/Straight Truck) NC III prepares you for work as a passenger bus driver or straight truck driver. Remember that you also need the right LTO licence for the vehicle you drive. Pay and hiring depend on the employer, and a certificate does not guarantee a job.
See more free options in our list of free TESDA courses with allowance.
Frequently asked questions
Does TESDA give a driver’s licence?
No. Licences are issued by LTO. TESDA gives a National Certificate after you pass the assessment.
How long are the courses?
Driving NC II is 118 hours, Driving (Passenger Bus/Straight Truck) NC III is 122 hours, and TESDA’s list gives 108 hours for Driving (Articulated Vehicle) NC III.
Do I need a licence before Driving NC III?
For the Passenger Bus/Straight Truck NC III, the TR asks for an LTO licence with restriction code 2.
Is there an allowance?
Some TESDA scholarship programs include a Training Support Fund based on days attended. The TESDA office confirms the current amount and eligibility.
Can I apply here?
No. This is an independent guide. Apply only at TESDA offices, accredited schools or official TESDA channels.