This guide explains the TESDA Shielded Metal Arc Welding (SMAW) NC I course and how free training slots work.
Shielded Metal Arc Welding NC I is the entry-level TESDA welding qualification. It teaches you to set up welding equipment, prepare and fit up steel plates and weld them with the SMAW process, the common “stick welding” method. Below you will find what the Training Regulations cover, the training hours, entry requirements, scholarship options and how to earn the National Certificate.
Please note: this is an independent guide site. We are not TESDA and we do not handle enrollment. You can apply only at TESDA provincial or district offices, TESDA-accredited schools and training centers, or on the official e-tesda.gov.ph platform.
What is SMAW NC I?
According to the TESDA Training Regulations (TR) for this qualification, SMAW NC I consists of the competencies a person needs to weld carbon steel plate components as specified by a layout, blueprint, diagram, work order, welding procedure or oral instructions, using SMAW welding equipment.
The TR states that the qualification conforms with well-known welding codes: AWS D1.1 (Structural Welding Code), ASME IX (Boiler and Pressure Vessel Code), API 1104 (pipelines and related facilities) and ISO 9606-1 (qualification of welders for steel). This means the skills you practice are tied to standards used by the industry, which is a good base if you later move to higher welding levels.
What you will learn
The qualification has basic, common and core units of competency. You must achieve all of them.
Safety firstapply safety practices and basic housekeeping in the shop
Drawings and mathread drawings and sketches and do industry calculations
Setup and fit-upprepare weld materials, set up equipment and fit up joints
Plate weldingweld carbon steel plates using SMAW and repair welds
The units listed in the TR are:
- Basic competencies: receive and respond to workplace communication, work with others, demonstrate work values, and practice basic housekeeping procedures.
- Common competencies: apply safety practices, interpret drawings and sketches, perform industry calculations, contribute to the quality system, use hand tools, prepare weld materials, set up welding equipment, fit up weld materials, and repair welds.
- Core competency: weld carbon steel plates using SMAW.
Most of your time will be spent in the welding shop practicing joints on steel plates under a trainer’s supervision. Expect to use protective gear such as a welding helmet, gloves and protective clothing, as safety practices are a required unit.
How long is the training?
The Training Regulations give suggested nominal training hours of:
- 28 hours for basic competencies
- 56 hours for common competencies
- 184 hours for core competencies
That is 268 hours in total. Schools may run longer programs. For example, the TESDA Women’s Center lists its free SMAW NC I program at 289 nominal hours over about 37 training days. Ask your chosen school for its exact hours, training days and class schedule before you enroll.
Entry requirements
The TR lists these trainee entry requirements for SMAW NC I:
Unlike many other NC qualifications, the SMAW NC I TR does not list a specific years-of-schooling requirement in this section. However, schools and scholarship programs can have their own rules on age, education and documents. For example, TESDA’s scholarship guidelines set age limits for each program. Ask the TESDA office or school for their complete list before enrolling.
Can you take SMAW NC I for free?
Yes, when a scholarship slot is available. TESDA programs such as the Training for Work Scholarship Program (TWSP), the Special Training for Employment Program (STEP) and free TVET in state-run institutions under the Universal Access to Quality Tertiary Education Act (UAQTEA) cover training and assessment for qualified scholars. TESDA describes TWSP as a response to critical skills shortages in priority sectors and names metals and engineering among them.
Some TESDA scholarship programs also include a training support allowance, and STEP may include starter toolkits when applicable. The amount and who receives it are set in TESDA guidelines, so the office confirms eligibility. Our guide to free TESDA courses with allowance explains each program in plain words.
How to apply, step by step
Want to compare welding with other trades first? Use our free TESDA course finder to see related qualifications.
Assessment and National Certificate
Section 4 of the TR explains the certification rules:
- You must show competence in all units listed in the qualification.
- The assessment focuses on the core unit, welding carbon steel plates using SMAW. Basic and common units are checked at the same time.
- Successful candidates receive a National Certificate signed by the TESDA Director General.
- Graduates of formal, non-formal and informal training, including enterprise-based programs, can apply.
- Experienced welders, whether employed or self-employed, can also apply for assessment.
The assessment is practical, so the quality of your welds on test plates matters most. Practice the joints and positions your trainer assigns until your results are consistent.
Is there a free online course?
The TESDA Online Program on e-tesda.gov.ph offers free self-paced courses, but we could not confirm a SMAW course in its current catalog. Welding is a hands-on skill, and the national assessment requires actual welding, so plan for face-to-face training in a shop. You can still browse e-tesda.gov.ph for related safety topics before class.
Career paths after SMAW NC I
According to the Training Regulations, a person who achieves SMAW NC I is competent to be a Plate Welder (SMAW). Welding skills are used in construction and metal fabrication work. Hiring, pay and work conditions depend on each employer, so the certificate does not guarantee a job.
After NC I, you can look into Shielded Metal Arc Welding NC II, which TESDA training centers such as the TESDA Women’s Center also offer. Ask your TESDA office about the next level once you have your NC I.
Frequently asked questions
How many hours is SMAW NC I?
The TR suggests 268 hours: 28 basic, 56 common and 184 core. Some schools run longer programs, such as 289 hours at the TESDA Women’s Center.
What job title does SMAW NC I lead to?
The TR names Plate Welder (SMAW) as the role for this qualification.
Do I need a high school diploma?
The TR’s trainee entry list focuses on communication, fitness, good moral character and basic math. Schools and scholarship programs may add their own requirements, so ask the office.
Is there an allowance?
Some TESDA scholarship programs include a training support allowance. The TESDA office or school confirms the amount and eligibility.
Can I be assessed if I already weld for work?
Yes, the TR allows experienced workers to apply for assessment. Contact an accredited assessment center for schedules and fees.