Free TESDA Electrical Installation and Maintenance NC II Guide

What TESDA EIM NC II covers, the 196 training hours, entry requirements, scholarship options and how to earn the National Certificate.

This guide explains the TESDA Electrical Installation and Maintenance NC II course and how free training slots work.

Electrical Installation and Maintenance NC II, often shortened to EIM NC II, is one of the most popular TESDA qualifications for people who want to work as electricians in homes and small buildings. Below you will find what the Training Regulations cover, how long the training takes, the entry requirements, how scholarships work and how to earn the National Certificate.

Please note: this is an independent guide site. We are not TESDA and we do not process applications. You can enroll only at TESDA provincial or district offices, TESDA-accredited schools and training centers, or on the official e-tesda.gov.ph platform.

What is EIM NC II?

According to the TESDA Training Regulations (TR) for Electrical Installation and Maintenance NC II, amended and promulgated on December 16, 2015, this qualification covers the competencies a person needs to install and maintain electrical wiring, lighting and related equipment and systems where the voltage does not exceed 600 volts in residential houses and buildings.

In simple terms, the course teaches you how to plan and run wiring, install protective devices such as breakers and grounding, and mount outlets, switches and lighting fixtures, all while following safety and quality standards. It is a practical, hands-on qualification built for entry-level electrical work.

What you will learn

The qualification has three groups of units of competency. You need to achieve all of them to complete it.

🤝

Basic competenciesworkplace communication, teamwork, career professionalism, occupational health and safety

📐

Common competencieshand tools, measurement and calculation, technical drawings, quality standards, wire termination

🔌

Wiring workroughing-in, wiring and cabling for single-phase systems

💡

Devices and fixturesprotective devices, grounding, outlets, switches and lighting

The core units in the TR are:

  • Perform roughing-in activities, wiring and cabling works for single-phase distribution, power, lighting and auxiliary systems
  • Install electrical protective devices for distribution, power, lighting, auxiliary, lightning protection and grounding systems
  • Install wiring devices of floor and wall mounted outlets, lighting fixtures and switches, and auxiliary outlets

The common units include using hand tools, performing mensuration and calculation, preparing and interpreting technical drawings, applying quality standards, and terminating and connecting electrical wiring and electronic circuits. These skills are shared with other electrical and electronics qualifications, which is useful if you later move to a related course.

How long is the training?

The 2015 amended TR sets the nominal training hours at 196 hours in total:

  • 18 hours for basic competencies
  • 24 hours for common competencies
  • 154 hours for core competencies

This is the national reference. Real programs can be longer because each school designs its own schedule. For example, the TESDA Women’s Center lists its free EIM NC II program at 220 nominal hours over about 28 training days. Always ask your chosen school for its exact hours, days and class time before you enroll.

Entry requirements

The Training Regulations say a trainee for EIM NC II:

Has completed at least 10 years of basic education, or holds an ALS certificate with Grade 10 equivalent
Can communicate both orally and in writing
Can perform basic mathematical computation

Schools may add their own requirements, such as a birth certificate, school records and ID photos. If you apply for a scholarship, the TESDA office or school will also ask you to fill out a learner’s profile form. Ask for the complete list before you go, so you can bring everything in one visit.

💡 Tip: Brush up on basic math, fractions and unit conversion before class. The common units include measurement and calculation, and good math makes the wiring layouts much easier.

Can you take EIM NC II for free?

Yes, it is possible when there is a scholarship slot. TESDA runs programs such as the Training for Work Scholarship Program (TWSP), the Special Training for Employment Program (STEP) and free TVET in state-run institutions under the Universal Access to Quality Tertiary Education Act (UAQTEA). For qualified scholars, the training and the competency assessment are free. Some TESDA scholarship programs also include a training support allowance, but the office confirms the amount and who is eligible.

TESDA describes TWSP as a response to critical skills shortages in priority sectors, and its program page names construction as well as metals and engineering among them. Slots are still assigned per qualification, region and year, so availability changes. Read our guide to free TESDA courses with allowance for the age and other basic rules of each program.

How to apply, step by step

1

Look for a registered programFind a TESDA-accredited school, TESDA training center or TESDA Technology Institution that offers EIM NC II in your area.
2

Ask about scholarship batchesVisit or contact your TESDA provincial or district office, or ask the school, whether a scholarship batch is open.
3

Submit your documentsBring your school records, valid ID and the forms the office requires, including the learner’s profile.
4

Finish the trainingAttend every session. Scholarship rules follow a no attendance, no allowance policy.
5

Take the assessmentComplete the national competency assessment at an accredited assessment center.

Still choosing between courses? Our free TESDA course finder helps you compare qualifications by interest and schedule.

Assessment and National Certificate

Section 4 of the TR explains how certification works:

  • You must show competence in all units of the qualification through a project-type assessment.
  • The assessment focuses on the core units, with basic and common units checked at the same time.
  • Successful candidates receive a National Certificate II signed by the TESDA Director General.
  • Graduates of formal, non-formal and informal training, and experienced workers, can apply for assessment.
  • Before the assessment, candidates fill out a self-assessment guide (SAG), which TESDA publishes for this qualification.
  • People who hold a Certificate of Competency (COC) in EIM NC II are advised to take the assessment under the amended TR before their COC expires.

Is there a free online course?

The TESDA Online Program on e-tesda.gov.ph offers free self-paced courses in several sectors, and the catalog changes from time to time. We could not confirm the current online course list for this qualification. Even if you find related online modules, the practical wiring work and the national assessment still have to be done in person.

Career paths after EIM NC II

According to the Training Regulations, a person who achieves this qualification is competent to work as a:

  • Building-wiring electrician
  • Residential or commercial-wiring electrician
  • Maintenance electrician

These skills are used in house construction, building maintenance and small repair services. Hiring decisions and pay depend on each employer and your experience, so the certificate alone does not guarantee a job. Some graduates continue to related qualifications in the electrical and electronics sector to widen their options.

Frequently asked questions

How many hours is EIM NC II?

The 2015 amended Training Regulations set 196 nominal hours. Some schools run longer programs, such as 220 hours at the TESDA Women’s Center.

What voltage does EIM NC II cover?

The qualification covers electrical systems where the voltage does not exceed 600 volts in residential houses and buildings.

Do I need to be a high school graduate?

The TR asks for at least 10 years of basic education or an ALS certificate with Grade 10 equivalent, plus basic communication and math skills.

Is there an allowance?

Some TESDA scholarship programs include a training support allowance. The TESDA office or school confirms the amount and eligibility.

Can I be assessed if I already work as an electrician?

Yes, the TR allows experienced workers to apply for assessment. Ask an accredited assessment center about schedules and fees.

Website operated by ZORVIA LTDA — CNPJ 68.644.344/0001-77
Av. Centenário, 5079, CXPST 321, Próspera, Criciúma/SC, CEP 88811-701, Brasil
About usPrivacy PolicyTerms of UseContact

Diário Vagas is a digital content portal currently operated and managed by ZORVIA LTDA, registered with CNPJ no. 68.644.344/0001-77.

Avenida Centenário, 5079, CXPST 321, Próspera, Criciúma – SC, CEP 88.811-701, Brasil